TRAINING
1. Water Resources Elements: Analysis, Planning, Management, 1978.
2. Underground Water Tank Management in Delta, 1980.
3. Water Resources System Analysis, 1982.
4. Workshop and Training on Design of Hydraulic Structure, 1989.
5. Training Course for The Engineers Of The National Company, Baraka For Iron And Steel, National Company, Baraka For Iron And Steel, (1991-1992).
6. Road Maintenance Programme for North Sinai Governorate, Training for Road Engineers of the Directorate of Roads & Transportation, July 1992.
7. Natural Disasters, causes, assessment and protection, September 1994.
8. Combustion Technology in Boilers and Industrial Furnaces, September 1994.
9. Pumps and Pumping of Liquid, September 1994.
10. Thermal Insulation, September 1994.
11. Efficient Operation of Steam Boilers, September 1994.
12. Underground Power Cables, September 1994.
13. Oil and Gas Burners for Boilers and Industrial Furnaces, October 1994.
14. Air and Gas Compressors, October 1994.
15. Grounding of Power Systems, October 1994.
16. Performance and Rationalization of Fuel and Oil in Earth Moving Equipment, October 1994.
17. Energy Conservation in Refractories and Building Material industries, October 1994.
18. Advanced Vibration Monitoring and Diagnostic Techniques for Predictive Maintenance, November 1994.
19. Insulation Coordination of Power Systems, November 1994.
20. Natural Disasters, November 1994.
21. Diesel Engines : Operation and Performance, December 1994.
22. Failures and Faults in Engineering Systems, December 1994.
23. Electrical Protection Systems, December 1994.
24. Building Economics and Project Management, December 1994.
25. Waste Heat Recovery in Industrial Applications, January 1995.
26. Building Maintenance, January 1995.
27. Energy Conservation in Fertilizers & Chemical Industries, January 1995.
28. Energy Conservation in Petroleum & Petrochemical Industries, January 1995.
29. Fires: Precaution, Protection and Fighting, March 1995.
30. Energy Conservation in Lighting Systems, March 1995.
31. Energy Conservation in Paper and Aluminium Industries, March 1995.
32. Industrial Waste Management, March 1995.
33. Gas Turbines: Operation and Performance, April 1995.
34. Measuring Techniques and Evaluation of Energy Equipment Performance, April 1995.
35. Electrical Power Systems: Operation and Trouble Shooting, April 1995.
36. Failures & Explosions of Steam Boilers, May 1995.
37. Liquids, Fuels and Steam Flow Through Pipe-Lines and Networks, May 1995.
38. New Trends in Electrification of Industrial Complexes, June 1995.
39. Natural Disasters, causes, assessment and protection, September 1995.
40. Insulation Coordination of Power Systems, September 1995.
41. Combustion Technology in Boilers and Industrial Furnaces, September 1995.
42. Advanced Vibration Monitoring and Diagnostic Techniques for Predictive Maintenance, September 1995.
43. Industrial Waste Management, September 1995.
44. Electrical Protection Systems, September 1995.
45. Measuring Techniques and Evaluation of Energy Equipment Performance, September 1995.
46. Fires : Precaution, Protection and Fighting, October 1995.
47. Heating, Ventilation and Air-Conditioning Systems, October 1995.
48. New Trends in Electrification of Industrial Complexes, October 1995.
49. Waste Heat Recovery in Industrial Applications, October 1995.
50. Building Economics and Project Management, October 1995.
51. Air and Gas Compressors, October 1995.
52. Principles and Industrial Applications of Robots, October 1995.
53. Underground Power Cables, October 1995.
54. Advanced Trouble Shooting and Fault Isolation Techniques, October 1995.
55. Failures and Faults in Engineering Systems, October 1995.
56. Co-Generation an Efficient Utilization of Steam in Industry, October 1995.
57. Grounding of Power Systems, November 1995.
58. Failures & Explosions of Steam Boilers, November 1995.
59. Diesel Engines : Operation and Performance, November 1995.
60. Insulating Liquids : Theory, Practical Problems & Solutions, November 1995.
61. Short Circuit Analysis for Electrical Networks with Application to Participants Networks, November 1995.
62. Pumps and Pumping of Liquid, November 1995.
63. Oil and Gas Burners for Boilers and Industrial Furnaces, November 1995.
64. Building Maintenance, November 1995.
65. Principles and Industrial Applications of Robots and Numerical Controlled Machines (NC & CNC), November 1995.
66. Gas Turbines: Operation and Performance, December 1995.
67. Electrical Power Systems: Operation and Trouble Shooting, December 1995.
68. Thermal Insulation, December 1995.
69. Energy Conservation in Lighting Systems, December 1995.
70. Liquids, Fuels and Steam Flow through Pipe-Lines and Networks, December 1995.
71. A Course and Training Workshop Technical Language and Report Writing, December 1995.
72. Efficient Operation of Steam Boilers, December 1995.
73. Performance and Rationalization of Fuel and Oil in Earth Moving Equipment, December 1995.
74. Natural Disasters, December 1995.
75. New Trends in Internal Combustion Engines, December 1995.
76. Database for Road Transport Policies, 1996.
77. Power Factor Improvement and Harmonica Control, September 1996.
78. Special Types of Building Materials and Techniques, September 1996.
79. Combustion Technology in Boilers and Industrial Furnaces, September 1996.
80. Uninterruptible Power Supply (UPS), September 1996.
81. LAB and Institute Testing of Building Materials and Structures, September 1996.
82. Measuring Techniques and Evaluation of Energy Equipment Performance, September 1996.
83. Demand Side Management, September 1996.
84. Heating, Ventilation and Air-Conditioning Systems, September 1996.
85. Energy Conservation in Petroleum & Petrochemical Industries, September 1996.
86. Energy Management Systems (EMS) , September 1996.
87. Gas Turbines : Operation and Performance, September 1996.
88. Industrial Waste Management, September 1996.
89. Fires : Precaution, Protection and Fighting, September 1996.
90. Advanced Trouble Shooting and Fault Isolation Techniques, September 1996.
91. Advanced Vibration Monitoring and Diagnostic Techniques for Predictive Maintenance, September 1996.
92. Co-Generation an Efficient Utilization of Steam in Industry, September 1996.
93. Underground Power Cables, September 1996.
94. Building Economics and Project Management, October 1996.
95. Insulation Coordination of Power Systems, October 1996.
96. Diesel Engines : Operation and Performance, October 1996.
97. Insulating Liquids : Theory, Practical Problems & Solutions, October 1996.
98. Short Circuit Analysis for Electrical Networks With Application to Participants Networks, October 1996.
99. Air and Gas Compressors, October 1996.
100. Building Maintenance, October 1996.
101. Evaluation of Tender Selection and Proposal Strategy, October 1996.
102. Electrical Power Systems: Operation and Trouble Shooting, October 1996.
103. Thermal Insulation, October 1996.
104. Risk Assessment for Project Management, November 1996.
105. Liquids, Fuels and Steam Flow through Pipe-Lines and Networks, November 1996.
106. Energy Efficient Electric Motors and Drives, November 1996.
107. New Trends in Internal Combustion Engines, November 1996.
108. Selection and use of Engineering Materials, November 1996.
109. Implementing Energy Efficiency Technologies – Practical Considerations, November 1996.
110. Polymer Process Engineering for Mechanical Engineering, November 1996.
111. Energy Conservation in Refractories and Building Material Industries, November 1996.
112. Performance and Rationalization of Fuel and Oil in Earth Moving Equipment, November 1996.
113. Introduction to Composite Material, November 1996.
114. New Trends in Electrification of Industrial Complexes, November 1996.
115. Waste Heat Recovery in Industrial Applications, November 1996.
116. Technical Language in Business Communication Writing Strategies, Part (1), December 1996.
117. High Efficiency Lighting-Lighting Design and Control Systems, December 1996.
118. Maintenance of Electrical Power System Components, December 1996.
119. Technical Language in Business Communication Oral Strategies, Part (2) , December 1996.
120. Failures and Faults in Engineering Systems, December 1996.
121. Oil and Gas Burners for Boilers and Industrial Furnaces, December 1996.
122. Electrical Protection Systems, December 1996.
123. Pumps and Pumping of Liquid, December 1996.
124. Failures & Explosions of Steam Boilers, December 1996.
125. Efficient Operation of Steam Boilers, December 1996.
126. Welding Engineering, December 1996.
127. Generation, Hazard, Legislation and Control Technology of Pollutant from Combustion, December 1996.
128. Database for Road Transport Policies, 1997.
129. Feeding of Database of Road Transport Policies, 1997.
130. Statistical Quality Control, February 1997.
131. The Testing of Engineering Materials, February 1997.
132. Steels and Cast-Irons (Heat Treatment and Quality Control), February 1997.
133. Quality Systems, February 1997.
134. Failure of Mechanical Engineering Components : Analysis and Prevention, February 1997.
135. Japanese Management System and Quality Control Circles, February 1997.
136. Why Metals Fails? (Case Histories in Failure Analysis) , February 1997.
137. Total Quality Management, February 1997.
138. Surface Engineering (Prevention of Surface Failure) , February 1997.
139. International Quality Management and Quality Assurance Standards, ISO 9000, February 1997.
140. Absorption Systems for Heating, Ventilation and Air-Conditioning, February 1997.
141. Statistical Quality Control, February 1997.
142. Testing of Electrical Equipment According to IEC, February 1997.
143. Industrial Safety, March 1997.
144. Quality Control System and Management, March 1997.
145. Uninterruptible Power Supply (UPS), March 1997.
146. Maintenance and Testing of Steam Systems and Its Industrial Applications, March 1997.
147. Welding Engineering, March 1997.
148. Short Circuit Analysis for Electrical Networks, March 1997.
149. Industry Safety, March 1997.
150. Technical Language in Business Communication Written Strategies, March 1997.
151. International Quality Management Quality Assurance Standards, ISO 9000 and Total Quality management, March 1997.
152. Maintenance of Electrical Power System Components, April 1997.
153. Maintenance Management and Planning, April 1997.
154. Quality Assurance of Steel and R.C. Structures, May 1997.
155. SF6 Application in Electrical Power Systems, May 1997.
156. Repair of Reinforced Concrete Structures, May 1997.
157. Grounding of Power Systems, May 1997.
158. Digital Protection of Power Systems, May 1997.
159. Implementing Energy Efficiency Technologies-Practical Considerations, May 1997.
160. Electricity Distribution Network Design, May 1997.
161. Special Types of Building Materials and Its Technology, September 1997.
162. Combustion Technology in Boilers and Industrial Furnaces, September 1997.
163. Demand Side Management, October 1997.
164. Evaluation of Energy Equipment Performance, October 1997.
165. Heating, Ventilation and Air-Conditioning Systems, October 1997.
166. Advanced Electrical Trouble Shooing and Fault Isolation Techniques, October 1997.
167. New Tends in Internal Combustion Engines, October 1997.
168. Electrical Power Systems: Operation and Trouble Shooting, October 1997.
169. Failure and Explosions of Steam Boilers, October 1997.
170. Underground Power Cables, October 1997.
171. Natural Gas Conversion of Boilers and Industrial Furnaces, November 1997.
172. Maintenance of Concrete Buildings, November 1997.
173. Liquids, Fuels and Steam Flow through Pipe-Lines and Networks, November 1997.
174. Electrical Protection of Power Systems, November 1997.
175. Efficient Operation of Steam Boilers, November 1997.
176. Air and Gas Compressors, November 1997.
177. Technical Writing in Reports and Business Communication, November 1997.
178. Pumps and Pumping of Liquids, November 1997.
179. New Trends in Electrification of Industrial Complexes, November 1997.
180. Absorption Systems for Heating, Ventilation and Air-Conditioning, November 1997.
181. Evaluation of Tender Selection and Proposal Strategy, December 1997.
182. Oil and Gas Burners for Boilers and Industrial Furnaces, December 1997.
183. Maintenance of Electrical Power System Components, December 1997.
184. Gas Turbines : Operation and Performance, December 1997.
185. Welding Engineering, December 1997.
186. Cost and Pricing of Electricity, December 1997.
187. Feeding of Database of Road Transport Policies, 1998.
188. Cathodica Protection, February 1998.
189. Control of Compressors, HVAC Systems, Drying and Combustion Processes, February 1998.
190. Quality Control System and Management, February 1998.
191. Combustion Technology in Boilers and Industrial Furnaces, March 1998.
192. Maintenance of Electrical Power System Components, March 1998.
193. Instrumentation and Control Devices, March 1998.
194. Electricity Distribution Network Design, March 1998.
195. Energy Management systems, March 1998.
196. Natural Gas Network and Conversion Technology for Boilers, Furnaces and Vehicles, March 1998.
197. Testing of Electrical Equipment According to IEC, March 1998.
198. ISO 14000, March 1998.
199. Process Control Techniques, April 1998.
200. Short Circuit Analysis for Electrical Networks, April 1998.
201. International Quality Management and Quality Control Assurance Standard and ISO 9000, April 1998.
202. Grounding of Power Systems, May 1998.
203. Power Quality and Harmonics, May 1998.
204. Electrical Protection of Power Systems, May 1998.
205. Distributed Computer Control System (DCS), May 1998.
206. Quality Control Systems Management, May 1998.
207. Environmental and Energy Audits, May 1998.
208. Training of the Trainers, May 1998.
209. "EESU Organized and Conducted Intensive Courses On Investigating And Inspection Of Clay Brick Factories. The Beneficiaries Of Those Courses Were The Environment Inspectors In Different Governorates, Clay And Thermal Brick Industry", 1999.
210. Feeding of Database of Road Transport Policies, 1999.
211. Testing of Electrical Power Equipment According to Standard Specifications, October 1999.
212. Failures and Explosions of Steam Boilers, October 1999.
213. Protection of Electrical Power Equipment from Direct Lighting Stokes, October 1999.
214. Natural Gas Network and Conversion Technology for Boilers, Furnaces and Vehicles, October 1999.
215. Harmonics in Electrical Power Systems, October 1999.
216. Combustion Technology in Boilers and Industrial Furnaces, October 1999.
217. Demand Side Management (DSM), October 1999.
218. Waste heat Recovery in Industrial Applications, October 1999.
219. High Efficiency Lighting (Lighting Design and Control Systems), November 1999.
220. Pumps and Pumping of Liquids, November 1999.
221. New Trends in Electrification of Industrial Complexes, November 1999.
222. Diesel Engine : Operation and Performance, November 1999.
223. Protection of Electrical Power Systems, November 1999.
224. Efficient Operation of Steam Boilers, November 1999.
225. Heating, Ventilation and Air-Conditioning Systems, November 1999.
226. Power Transformers, November 1999.
227. Feeding of Database of Road Transport Policies, 2000.
228. Short Circuit Analysis for Electrical Networks, January 2000.
229. Fundamentals of Engine Maintenance, January 2000.
230. Air Conditioning System Components, Servicing and Trouble Shooting, January 2000.
231. Cathodic Protection, January 2000.
232. Underground Power Cables, February 2000.
233. Process Control Techniques, February 2000.
234. Electricity Distribution Network Design, February 2000.
235. A Course and Training Workshop in Technical Language and Report Writing, February 2000.
236. Advanced Trouble Shooting and Fault Isolation Techniques, February 2000.
237. International Quality Management, Quality Control Assurance Standard and ISO 9000, February 2000.
238. Electrical Power Systems: Operation and Trouble Shooting, February 2000.
239. Welding Engineering, February 2000.
240. Insulation Coordination of Power Systems, March 2000.
241. Distributed Computer Control Systems (DCS), March 2000.
242. Power Factor Improvement and Harmoinc Control, March 2000.
243. Evaluation of Tender Selection and Proposal Strategy, March 2000.
244. Grounding of Power Systems, April 2000.
245. Special Types of Building Materials and Construction Technology, April 2000.
246. Insulating Liquids : Theory, Practical Problems & Solutions, April 2000.
247. ISO 14000, April 2000.
248. Instrumentation and Control Devices, April 2000.
249. Maintenance of Concrete Buildings, April 2000.
250. Advanced Vibration Monitoring and Diagnostic Techniques for Predictive Maintenance, May 2000.
251. Energy Efficiency Technologies, May 2000.
252. Quality Assurance of Steel and R.C. Structures May 2000.
253. Electrical Power Measurement, Testing and Calculations, May 2000.
254. Power Factor Improvement and Harmonic Control, September 2003.
255. Defects and Repair of concrete Structures, September 2003.
256. Oil Field Processing, September 2003.
257. Process Control Techniques, September 2003.
258. Maintenance Management & Planning, September 2003.
259. Diesel Engine: Operation and Performance, September 2003.
260. Grounding of Power Systems, September 2003.
261. Sand Production, Prediction and Control, September 2003.
262. Wireless Lan Technology, October 2003.
263. Quality Assurance of Steel and R.C. Structures, October 2003.
264. Formation Evaluation (Part I), October 2003.
265. Failures and Explosions of Steam Boilers, October 2003.
266. Dangers of Electricity on Human Beings, November 2003.
267. Gas Production Operation, November 2003.
268. Distributed Computer Control, December 2003.
269. Meetings Negotiations, December 2003.
270. Heating, Ventilation and, December 2003.
271. Building Maintenance, December 2003.
272. Circuit Breakers : Vacuum, Oil, Sf6 And Air, December 2003.
273. Petroleum Economics, December 2003.
274. Basic Managerial Skills, December 2003.
275. Efficient Operation of Steam Boilers, December 2003.
276. Specialized Training Course in Maintenance & Traffic Engineering for a Group of Saudi Engineers 2003.
277. Electrical Safety and New Trend in Electrification of Hospitals, January 2004.
278. Measurements while Drilling, January 2004.
279. Processes Measurement Techniques, January 2004.
280. Oil Field Equipments, January 2004.
281. Demand Side Management (DSM) and Energy, January 2004.
282. Statistical Quality, January 2004.
283. Natural Gas Processing, January 2004.
284. Underground Power Cables, January 2004.
285. Product Design and Development, February 2004.
286. Natural Gas Reservoir Engineering, February 2004.
287. A Course and Training Workshop in Technical Language and Report writing, February 2004.
288. Stress Analysis of Industrial Piping, February 2004.
289. Testing of Electrical Power Equipment According to Standard Specifications, February 2004.
290. Evaluation of Tender Selection and Proposal Strategy, February 2004.
291. Electronic Commerce Foundations, March 2004.
292. Electrical Installation and Lighting Design, March 2004.
293. New Trends In Electrification of Industrial Complexes, March 2004.
294. Formation Evaluation (Part II) , March 2004.
295. Combustion Technology in Boilers and Industrial Furnaces, March 2004.
296. International Quality Management and Quality Control Assurance Standard and ISO 9000, March 2004.
297. Directional and Horizontal Drilling Technology, March 2004.
298. Electrical Distribution Network Design and Operation, March 2004.
299. Protection of Electrical Power Systems, April 2004.
300. Oil Well Completion, April 2004.
301. Reservoir Simulation, April 2004.
302. Welding Engineering, April 2004.
303. Advanced Applications for Analysis and Design of Structural Systems (using SAP 2000), April 2004.
304. Advanced Vibration Monitoring and Diagnostic Techniques for Predictive Maintenance, April 2004.
305. Production Optimization and Nodal System Analysis, April 2004.
306. Advanced Trouble Shooting and Fault Isolation Techniques, April 2004.
307. Computerized Design of R.C. Components According to Egyptian Code, May 2004.
308. Air and Gas Compressors, May 2004.
309. Gas Turbines: Operation and Performance Insulation Coordination of Power Systems, May 2004.
310. Short Circuit Analysis of Electrical Networks, May 2004.
311. Oil Production by Artificial Lift Methods, May 2004.
312. Insulation Coordination of Power Systems, May 2004.
313. Instrumentation and Control Devices, May 2004.
314. Production Logging, May 2004.
315. Basic Managerial Skills, March 2005.
316. Combustion Technology And Usage Of Natural Gas In Boilers And Industrial Furnaces, March 2005.
317. Electrical Distribution Network Design and Operation, March 2005.
318. Heating, Ventilation, And Air-Conditioning Systems, March 2005.
319. Defects And Repair of Concrete Structures, April 2005.
320. Design And Efficient Operation Of Steam Networks And Condensate Return, April 2005.
321. Circuit Breakers :Vacuum, Oil, Sf6 And Air, April 2005.
322. Evaluation of Tender Selection And Proposal Strategy, April 2005.
323. A Course And Training Workshop In Technical Language And Report Writing, April 2005.
324. Process Control Techniques, April 2005.
325. Computerized Design Of R.C. Components According To Egyptian Code, April 2005.
326. Distributed Computer Control, April 2005.
327. Protection of Electrical Power Systems, May 2005.
328. Building Maintenance, May 2005.
329. Short Circuit Analysis For Electrical Networks, May 2005.
330. Diesel Engine: Operation And Performance, May 2005.
331. Meetings Negotiations, May 2005.
332. Air and Gas Compressors, May 2005.
333. Testing of Electrical Power Equipment According To Standard Specifications, May 2005.
334. Maintenance Management & Planning, May 2005.
335. Failures, Explosions, And Environmental Compliance In Steam Boilers, June 2005.
336. International Quality Management And Quality Control Assurance Standard And ISO 9000, June 2005.
337. Power Factor Improvement And Harmonic Control, June 2005.
338. Welding Engineering, June 2005.
339. Grounding Of Power Systems, June 2005.
340. Advanced Applications For Analysis And Design Of Structural Systems (Using Sap 2000) , June 2005.
341. Demand Side Management (DSM) And Energy Conservation, June 2005.
342. New Trends In Electrification Of Industrial Complexes, June 2005.
343. Modern Secretariat and Library Management, Ministry of Petroleum, Libya, August 2005.
344. Advanced Maintenance and Security of Integrated Projects, Ministry of Petroleum, Libya, September 2005.
345. Testing of Electrical Power Equipment According to Standard Specifications, September 2005.
346. Total Quality Management, September 2005.
347. Heating, Ventilation, and Air-Conditioning Systems, September 2005.
348. Combustion Technology in Boilers and Industrial Furnaces, September 2005.
349. Industrial Process Control Techniques, September 2005.
350. Defects and Repair of Concrete Structures, September 2005.
351. Protection of Electrical Power Systems, November 2005.
352. Planning & Management of Maintenance Programmes, November 2005.
353. Instrumentation and Control Devices, November 2005.
354. Managerial and Leadership Skills Development for Engineers, November 2005.
355. Workshop on Technical Language and Report Writing, November 2005.
356. Quality Assurance of Steel and R.C. Structures, November 2005.
357. Short Circuit Analysis for Electrical Networks, December 2005.
358. Demand Side Management (DSM) and Energy Conservation, December 2005.
359. Quality Improvement by Benchmarking, December 2005.
360. Air and Gas Compressors, December 2005.
361. Industrial Pollution Management, Control, and Prevention, December 2005.
362. Managerial Skills “Meetings – Negotiations”, December 2005.
363. Plumbing for Engineers, December 2005.
364. Construction Supervision, December 2005.
365. Development & Administration of Residential Areas and Management of New Cities, Training for Commonwealth of Independent States and Islamic States, for the Ministry of Foreign Affairs, 2005.
366. Training Programme on Urban Development, For Albanian Professionals, Transport Planning for New Cities, 2005.
367. Radio Frequency Integrated Circuit Design Using CAD Tools, in Collaboration with High Technology Center for Electronics and Communications, Faculty of Engineering, Cairo University and NTI, 2005-2006.
368. Human Resources Development in Advanced Technology, Advanced Technology Center, Faculty of Engineering, Cairo University and NTI, 2005-2006.
369. Underground Power Cables, January 2006.
370. Statistical Quality Control, January 2006.
371. Liquids, Fuels and Steam Flow Through Pipe- Lines and Networks, January 2006.
372. Distributed Computer Control, January 2006.
373. Decision Making and Problem Solving, January 2006.
374. Building Maintenance, January 2006.
375. Stress Analysis of Industrial Piping, January 2006.
376. Structural Safety Assessment & Technical Reports, January 2006.
377. Electrical Distribution Network Design and Operation, February 2006.
378. International Quality Management and Quality Assurance Standards (ISO 9000(, February 2006.
379. Industrial Measurements and Instrumentation, February 2006.
380. Heat Exchangers Design, February 2006.
381. Negotiation Skills for Engineers, February 2006.
382. Wireless Lan Technology, February 2006.
383. Environmental Engineering in Construction, February 2006.
384. The Perspective of the 21st Century Human Resource Development, Ministry of Petroleum, Libya, February-March 2006.
385. Power Factor Improvement and Harmonic Control, March 2006.
386. Grounding of Power Systems, March 2006.
387. Processes Measurement Techniques, March 2006.
388. Construction Management, March 2006.
389. Business Processes Re-Engineering, March 2006.
390. Management Self-Development, March 2006.
391. Advanced Applications for Analysis and Design of Structural Systems (USING SAP 2000), March 2006.
392. Building Materials “Selections & Testing”, March 2006.
393. Electrical Installation and Lighting Design, April 2006.
394. Harmonics in Electrical Power Systems, April 2006.
395. Thermal Insulation, April 2006.
396. Workshop Management, April 2006.
397. Tender Selection and Awarding Strategy, April 2006.
398. Team Building, April 2006.
399. Networking Systems Engineering , April 2006.
400. Tender Documents & Contracts Award, April 2006.
401. Demand Side Management (DSM), May 2006.
402. Uninterruptible Power Supply (UPS), May 2006.
403. New Trends in the Control of Electrical Machines, May 2006.
404. Risk Assessment for Construction Projects, May 2006.
405. Business Management for Engineers “PART 1” , May 2006.
406. Modern Technology for Highway Construction and Paving, May 2006.
407. Vehicle Maintenance and Technology, Ministry of Petroleum, April-May 2006.
408. Electrical Power Systems: Operation and Trouble Shooting, June 2006.
409. Design of Low Voltage Electrical Networks, June 2006.
410. Welding Engineering , June 2006.
411. Failures and Explosions of Steam Boilers, June 2006.
412. Business Management for Engineers “PART II” , June 2006.
413. Analysis, Assessment & Repair of Historical Buildings, June 2006.
414. Maintenance & Repair of R.C. Structures, June 2006.
415. Analysis & Design of Tall Buildings Subject to Forth Quake Loading “As Per E.C.C.S. – 2004”, June 2006.
416. Computerized Design of R.C. Components According to Egyptian Code, June 2006.
417. Refrigeration Engineering, Master Foods Company, November-December 2006.
418. A Training Course for the Top Management Officials, on the Egyptian – European Partnership Agreement, July 2007.
419. A Training Course for the Top Management Officials, on the World Trading System and the accompanying Agreement, July 2007.